Industry solutions

The portal loading cranes are used at river and sea ports, industrial enterprises for bulk cargoes handling with grab and for operations with piece cargoes or containers, as well as for metal scrap and rolled metal with lifting electric magnets. They differ from assembly cranes higher operation modes of the crane and units.

The economically optimal solution for piece cargoes handling and handling operations both in hook and grab modes.

Grab gantry cranes are intended for bulk cargo handling by means of a special grab gripping device. Depending on particulars of cargo hoisting procedures the grab gantry crane can be equipped with a rope ladle grab, a removable electro-mechanical or an  electric hydraulic grab.

The rotary wagon tipplers of VRS-93 type have a rotor rotated on 175 degrees about the longitudinal axis. The unloading is performed into an underground receiving bin. The wagon tippler should operate together with an electric trolley-pusher and a positioner.

The rotary wagon tipplers of VRS-75 type have a rotor rotated on 175 degrees about longitudinal axis. The unloading is performed into an underground receiving bin. The wagon tippler should operate together with an electric trolley - pusher and a positioner.

The side wagon tippler of VBS type consists of two shaped rotors, mounted on a shaft, two cradles with two platforms, suspended on rods, two electric drives and four support pillars with bearings. Partial static balancing of the whole system about the axis of rotation is achieved by installing a counterweight.

The boom bucket-wheel stacker and reclaimer is intended for coal or other bulk material stockpiling and its reclaiming from a stockpile. The stacker and reclaimer travels on rail track, placed along a storage conveyor. The conveyor on the boom is reversible and it transfers material either from a storage conveyor to a stockpile or from the reclaiming rotor to a storage conveyor. The machine is intended for open stockyard operations.

The bridge-type bucket-wheel reclaimer is intended for reclaiming coal or other dry bulk material from a stockpile. It moves on rail tracks, located along a storage conveyor. It is usually applied at open homogenization stockyards.

The stacker is intended for material taking from a conveyor for following forming radial coal storage of a mine. Material feeding on a conveyor is carried out through a transfer bin, which consists of an external conveyor and lining of wear-resistant steel. Material unloading is carried out by free flow through a discharge unit.